Showing 225–240 of 500 results
-
-
-
-
-
-
-
LUX/FC Light meter
Product Specifications:
According to JIS C 1609:1993 and CNS 5119 general A class Specifications.
-
-
-
-
-
Manual Dispensing Gun (MS-53) for 50ML Cartridges
The DS-53 is a manual injector gun that allows you to apply the products in cartridges using an injector. Fully compatible with the plastiform range, this injector gun is the easiest to use for impression taking. The manual dispensing gun is a lightweight and robust applicator gun that allows you to apply Plastiform products manually…
-
Manual Putty Product
- A malleable plastiform that can be applied by hand to surfaces to be inspected. Its initial consistency is similar to modelling clay.
- The final impression is Semi-Soft (hardness 70 Shore A) and has a low deformation capacity. It is a very versatile product and highly compatible with the Double Blade Cutter.
- This plastiform replica accepts a maximum Extraction Stress of 5%. Thus, this product should be used on uncomplicated shapes and partial impressions. It is recommended for creating simple external shape impressions (threads, grooves, grooves, etc.) on medium to large-sized parts.
-
-
MD-3P
The MD-3P is a 3 components resin (liquid resin, liquid hardener, powder) polymerizing after mixing.
The initial consistency can be Fluid or slightly Pasty depending on the mixing ratio. The final impression is that it is extremely rigid and does not accept any removal constraints. The MD-3P must be used on very simple forms and non-porous surfaces. Polymerization starts when the hardener is mixed with the other components. The reaction causes light heating, and the compound hardens in 10 to 60 minutes (depending on the mixing ratio). The impression accuracy is better than 1µm.
The MD-3P is suitable for the following applications :
- Creation of custom-made Checking Gauges
It can also be used for :
- Impression of External Simple Forms
- Roughness Control
Curing Time: 10 to 60 minutes
Removal Constraint : 0 %
Elongation to Failure : 0 %
-
Measurement data wireless communication system
Product Specifications:
System: U-WAVE
Compatibility: U-WAVE-TM, U-WAVE-TC
Key Specifications:
U-WAVE-R Receiver
Power Supply: USB bus-powered
Dimensions: 140 × 80 × 31.6 mm
Weight: 130 g
System Compatibility: Windows 2000 to Windows 10 (32-bit and 64-bit)
U-WAVE-TC/TM Transmission UnitsTransmission Distance: Approx. 20 m (line of sight)
Protection Rating: IP67 (select models)
Power Supply: Lithium battery (CR2032)
Battery Life: 400,000 transmissions
What is the Measurement Data Wireless Communication System?
Through wireless transmission of measurement data, the U-WAVE technology connects digital measuring devices and PCs. The U-WAVE-R receiver and the U-WAVE-TM/TC transmission units are part of this system, and they function together to make data administration and gathering easier. By eliminating cords and providing real-time data transfer to programs like Notepad or Microsoft Excel, the wireless arrangement greatly improves operability.
Features and Benefits
- With a 20-meter range and IEEE802.15.4 operation, it improves versatility and lessens workplace clutter.
- Rapid and dependable communication is ensured via high-speed data transfer at 250 kbps.
- The system can link up to 15 U-WAVE-R units to a single PC and supports up to 100 Digimatic gauges.
- USB-ITPAK V2.1 software compatibility for effective data reporting and recording.
- Water and dust resistance are provided by IP67 Protection (available on some versions), which makes it perfect for manufacturing floor operations.
- Up to 400,000 transmissions on a long-lasting battery guarantee continuous operation.
- Compact design improves operability by fitting instruments closely.
